Safety; Intended Use; Safety Considerations; Disposal - tecan RESOLVEX M10 96 Operating Manual

2

Safety

2.1

Intended Use

The RESOLVEX™ M10 96 will be used to perform manual solid phase extraction of analytes
from various biological sample types as a stand-alone, independent module for sample
preparation. The product is intended to be used in a professional laboratory setting to perform
various manual solid phase extraction procedures using positive pressure application to 96-well
format filter/extraction plates to prepare samples for downstream analysis (e.g. LC/MS, HPLC).
2.2

Safety Considerations

Many reagents and samples used with the RESOLVEX™ M10 96 can pose chemical, biological
and radiological hazards. The user must always understand the potentially hazardous effects of
all the materials he/she works with. To prevent personal injury and/or equipment damage, we
recommend that the user always use impermeable gloves, chemical safety goggles, and
protective clothing following GLP (Good Laboratory Practice). Consult your company's safety
expert for guidance. The RESOLVEX™ M10 96 are manufactured from aluminum, stainless
steel, and plastics. Always clean up spills or overflow immediately to prevent any damage to the
equipment.
Warning: "This product can expose you to chemicals including Lead, which is known to
the State of California to cause cancer, and Bisphenol A, which is known to the State of
California to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov."
2.3

Disposal

Follow laboratory procedures for biohazardous waste disposal according to
national and local regulations
This chapter provides instructions for how to lawfully dispose of waste material
accumulating in connection with the Tecan RESOLVEX M10 48
OBSERVE ALL FEDERAL, STATE AND LOCAL ENVIRONMENTAL
2.3.1

Disposal of Packing Material

The packing material consists of recyclable material. If you do not intend to keep it for
future use, e.g. for transport and storage purposes, please dispose of the packing
material according to local regulations.
Operating Manual for RESOLVEX
REGULATIONS
TM
M10 96 & M10 96 XT
CAUTION
P/N 278-2036 Rev C Page 4/19