Warning Symbols; Laboratory Practices - tecan RESOLVEX M10 96 Operating Manual

2.5

Warning Symbols

The following warning symbols are to alert the user of the risks (of death, injury, or physical
reactions) that may arise if the unit is used or misused.
Symbol
DEPENDING ON THE APPLICATIONS, PARTS OF THE TECAN RESOLVEX
MAY HAVE BEEN IN CONTACT WITH BIO-HAZARDOUS MATERIAL.

2.6

Laboratory Practices

Warning: Extreme care should be exercised when handling flammable solvents to prevent
physical damage to the laboratory and to prevent injury to the users. Material Safety Data Sheets
(MSDS) should be available, studied, and carefully followed before using any of the chemicals.
Suitable education or training in the handling of chemical is highly recommended.
Operating Manual for RESOLVEX
Definition
Indicates the need for the user to consult the instructions for use
for important cautionary information such as warnings and
precautions that cannot, for a variety of reasons, be presented on
the unit itself
Indicates a warning of a closing motion of mechanical parts of
equipment. Care should be taken to avoid injury to hands when in
the vicinity of equipment with closing mechanical parts.
Biological Risk
MAKE SURE TO TREAT THIS MATERIAL ACCORDING TO THE
APPLICABLE SAFETY STANDARDS AND REGULATIONS.
 DECONTAMINATE ALL PARTS BEFORE DISPOSAL.
TM
M10 96 & M10 96 XT
WARNING
M10
P/N 278-2036 Rev C Page 6/19