Roland V-Mixer VM-C7100 Quick Start Manual page 27

2
Use the fader of each channel you wish to adjust to set the
input gain level of its connected microphone/instrument/
audio device. (+4 to -64dB)
Do this by first turning up each instrument's own output volume as much
as possible so that it produces a strong, loud signal. Next, on the console,
turn its channel's input gain level as high as possible within the displayed
level-meter range. If the input gain goes beyond OVER,
level-meter.
fig.207
When you have finished with these settings, you can set the channel levels
and L/R stereo pans.
Mixing Operations
The fader, at this point,
controls the input gain
level of each channel. To
send signals from the Main
out, set the output level of
each channel (go to next
page).
appears on the
If you are using a
condenser microphone or
any other similar
equipment, activate their
PHANTOM power.
You can also set each
channel's PHASE ON/OF,
PHANTOM POWER ON/
OFF and ATTENUATOR if
required by the input
source.
27