Turning Off The Power - Roland V-Mixer VM-C7100 Quick Start Manual

Getting Started

Turning Off the Power

Points to check before turning the power off
• Have you stored your Automix data on a memory card?
Your current Automix data is stored in the console's temporary memory
– this memory is cleared when you turn off the power. Be sure to save any
Automix data you wish to preserve onto a card before powering down.
• Did you turn down the volumes of the mixing console and
connected audio equipment?
If you leave the volume levels of your equipment turned up when you
turn off the power, a loud noise may occur that can cause damage to your
equipment.
fig.007
1
Store the current settings onto a memory card.
2
Turn off the power of connected audio equipment (amplifiers
and speakers).
3
Set [POWER] to OFF on the rear panel of the mixing console.
20
QUICK START "Storing a
Project" (p.39)