Preparing A Memory Card; To Format A Memory Card - Roland V-Mixer VM-C7100 Quick Start Manual

Getting Started

Preparing a Memory Card

You can store your current mixing settings on your console as a Project onto
a memory card (SmartMedia). A Project is a group of parameter settings that
the system memorizes. Such settings include Scenes (Owner's Manual:
p.244) and Automix data (Owner's Manual: p.232). You can instantly store/
recover these settings at any time by overwriting/reloading the Project.
We recommend you always create a new Project at the beginning of a new
mixing/recording session or live performance.
If a card is new, or if it has been used in another device, it must be formatted
for use in the system. If you already have a formatted the memory card,
proceed to "To Create a New Project" (p.19).

To Format a Memory Card

During formatting, all data on the card is erased. Therefore, be sure that the
card you intend to format does not contain data you wish to preserve .
fig.102
16
4,8 9 1
2 5 6,7
3
Owner's Manual "Storing
and Recalling All Mixer
Settings (Project)" (p.50)