Roland V-Mixer VM-C7100 Quick Start Manual page 41

1
Press [SOURCE/STUDIO2].
The "STUDIO1/2" display appears.
fig.212
2
Press [PAGE UP] [PAGE DOWN] to go to the "STUDIO 1" or
"STUDIO 2" page.
3
Turn [V1](SOURCE SELECT) to select the type of source signal
you wish to monitor.
The following can be selected.
• Input channel 1-24
• Flex Bus 1-12
• Cue bus L/R
• Monitor L/R
• Main out L/R
4
Turn [V2](LEVEL) to adjust the send level.
The source signals you selected in Step 3 can be heard from ASSIGNABLE
OUTs 1 and 2 for "STUDIO 1" L/R, or ASSIGNABLE OUTs 3 and 4 for
"STUDIO 2" L/R.
Using Sub Outputs
41