Adjusting A Signal's Tone (Equalizer) - Roland V-Mixer VM-C7100 Quick Start Manual

Mixing Operations

Adjusting a Signal's Tone (Equalizer)

You can set the desired tone quality of each signal by using an equalizer
(EQ).
In this system, each channel provides a parametric EQ. You can select from
a 4-band- or a 3-band-plus-1-effect-type EQ. The high-range and low-range
bands are shelving type EQs. The middle-high-range and middle-low-range
bands are peaking type EQs.
fig.110
1
Press [INPUT] or [MULTI IN] to select the type of channel you
wish to set up.
2
Hold down [CH EDIT] of the channel controlling the signal
whose tone you wish to adjust, and press [HI-MID/HI].
The "EQ BAND" editing page on the "CH EDIT" display appears.
32
2 3 5
2
4
1
Owner's Manual
"Adjusting Various
Channel Settings
(Equalizer, etc.)" (p.78)