Track Recording System (Tascam Da-88 X 1) - Roland V-Mixer VM-C7100 Quick Start Manual

8 Track Recording System (TASCAM DA-88 x 1)

• This is an 8 Track Recording System with one TASCAM DA Series recorder in use.
• You can mix 22 analog channels + 2 digital channels + 8 tape channels at once.
• You can control the recorder's Transport and the tracks' REC switch on the VM mixing console.
• You can memorize 100 Location points, and also search a Location by entering Time Codes.
• You can sync Automix with the tape.
• You can also connect the sequencer to the MIDI THRU on the "LEVEL METER".
• Turn the power on in the [DA Series]–[VM Series] order.
• To run the secuencer in sync with the MIDI CLOCK, connect it to the MIDI THRU on the "LEVEL METER".
• The VM-7000 Series cannot be used as the Word Clock Master.
SYNC
IN
DA-88
TDIF-1
TDIF-1
SYNC
DIF-AT
R-BUS(RMDBII)
MULTI 1-8
I/O Expansion Board
VM-24E
ANALOG
20 INPUTS
+
DIGITAL
Processor
2 INPUTS
VM-7200
VM-LINK
ANALOG Console
2 INPUTS
VM-C7100/C7200
MIDI
OUT
MIDI
IN
Level Meter Bridge MB-24
Connection Samples
MIDI
OUT
MIDI
IN
SEQUENCER/PC
91