To Create A New Project - Roland V-Mixer VM-C7100 Quick Start Manual

To Create a New Project

fig.10
1
Press [PROJECT].
The "PROJECT" display appears.
2
Press CURSOR [DOWN] to move the cursor to the lower field.
3
Press [F2](NEW).
The "CREATE NEW PROJECT" message appears on the display.
4
Press [F2](CREATE).
The "CONFIRM / Create New Project, OK ?" message appears.
5
Press [F5](OK).
The "CONFIRM / Keep Current Mixer Setting ?" message appears.
6
Press [F4](YES) or [F5](NO).
• [F4]...The current settings are kept after a new Project is created.
• [F5]...The system will restore the original factory settings after a new
Project is created.
7
When the "MESSAGE / Completed" display appears, press
[F6](EXIT).
A new Project has been created.
6
1 3,4 5 7 2
Getting Started
Owner's Manual "Storing
and Recalling All Mixer
Setings (Project)" p.50
You can name a Project by
pressing [F3](NAME/
PROJECT) in Step 3
(Owner's Manual "Re-
naming/erase-protecting a
project" p.53).
19