Connection Sample Using Digidesign Protools - Roland V-Mixer VM-C7100 Quick Start Manual

Connection Samples

Connection Sample Using Digidesign Protools

MIDI
OUT
MIDI
INTERFACE
MIDI
IN
ADAT Bridge I/O
IN OUT
OUT IN
DIF-AT
R-BUS(RMDBII)
MULTI 1-8
I/O Expansion Board
MIDI
OUT
Processor
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
MIDI
IN
Console
ANALOG
2 INPUTS
VM-C7100/C7200
MIDI
OUT
MIDI
IN
Level Meter Bridge MB-24
• This is a sample for connections with a Protools device using two ADAT Bridge I/O.
• You can mix 42 analog channels + 4 digital channels + 32 Protools channels at once.
• You can control the Protools' Transport on the VM mixing console.
• You can memorize 100 Location points, and also search a Location by entering Time Codes.
• You can sync Automix with the Protools.
• Turn the power on in the [Protools]–[VM Series] order.
• 50 Scenes can be stored per Project (because of cascade connection).
96
Protools (PC)
IN OUT
OUT IN
DIF-AT
R-BUS(RMDBII)
MULTI 9-16
VM-24E
Cascade Kit
VM-24C
VM-7200
(MASTER)
VM-LINK
ADAT Bridge I/O
IN OUT IN OUT
OUT IN OUT
DIF-AT DIF-AT
R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 1-8 MULTI 9-16
I/O Expansion Board
VM-24E
Cascade Kit Processor
VM-24C
VM-7200
(SLAVE)
IN
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS