Setting The Change In Volume According To The Force Used To Play The Keyboard (Velocity Range/Sensitivity/Max); Assigning Internal Parts To Internal Zone (Part Assign); Turning The Controllers In Each Zone On And Off - Roland RD-700GX Owner's Manual

Setting the Change in Volume
According to the Force Used to Play
the Keyboard
(Velocity Range/Sensitivity/Max)
This setting determines how the volume changes in response to
the force used to play the keyboard (velocity) and the
maximum value of the change.
This setting is disregarded with certain tones.
NOTE
Parameter Value
VRL (Velocity
1–127
Range Lower)
VRU (Velocity
1–127
Range Upper)
Sns
-63–
(Velocity
+63
Sensitivity)
Max
1–127
(Velocity Max)
Assigning Internal Parts to INTERNAL
Zone (Part Assign)
This determines which internal Parts are assigned to the
INTERNAL Zone.
Parameter
P.A (Part Assign)
Description
This specifies the lower limit
(VLW) and upper limit (VUP) of
the range in which the tone is
played according to the
velocity.
Make this setting when you
want the tone to change
depending on the key velocity.
This setting determines how the
volume changes in response to
the velocity.
The volume is increased as the
keyboard is played with
greater force when a positive
value is used; when a negative
value is selected, the volume
decreases as the keys are
played with greater force. If this
is set to "0," the volume will not
be affected by the strength of
your playing on the keyboard.
Maximum velocity value for the
corresponding key.
Lowering this value will
produce softer notes even if you
play the keyboard strongly.
Value
1–16
Making Detailed Settings for Tones
Turning the Controllers in Each Zone
On and Off
These settings determine whether the pedals connected to
each PEDAL jack (DAMPER, FC1, FC2), the Modulation lever,
the Pitch Bend lever, the sliders, and the [S1] [S2] buttons are
used to control the Parts (ON), or not (OFF).
Parameter Description
Dp Damper pedal
F1 Pedal connected to the FC1 jack
F2 Pedal connected to the FC2 jack
PB Pitch Bend lever
Md Modulation lever
LW2
CONTROL slider (LW2)
LW1 CONTROL slider (LW1)
UP2
CONTROL slider (UP2)
UP1 CONTROL slider (UP1)
S1
S1 button
S2 S2 button
Value
ON, OFF
93