Download Print this page
Roland RD-700GX Turbostart
Hide thumbs Also See for RD-700GX:

Advertisement

Quick Links

®
®ÂØÒňÎ
Welcome
Congratulations on your purchase of the Roland RD-700GX. This TurboStart contains
step-by-step instructions that will quickly introduce you the RD-700GX's major features.
Playing the Demo Songs
Use the following procedure to play one of the four built-in demo songs:
While holding down SPLIT, press TRANSPOSE.
1
2
Press the CURSOR
 and  buttons to select the desired song.
3
To begin playback, press F2 (PLAY).
4
To stop playback, press F1 (MENU).
5
Press EXIT to return to the main menu.
Selecting Sounds
The RD-700GX's categories make it easy to select tones. Use the following procedure to
select a tone:
1
Press the PIANO button in the ONE TOUCH area.
2
Press a TONE SELECT button to select a category such as ORGAN or STRINGS.
Use the Value dial or the DEC/INC buttons to choose a tone within the selected
3
category.
Layering Tones
The RD-700GX can layer up to four tones. Use the following procedure to layer a piano
tone and a string tone:
1
Press PIANO in the ONE TOUCH area.
2
Press the PIANO TONE SELECT button, and then use the DEC/INC buttons to select
the desired piano tone.
3
Press UPPER 2 so it's lit.
4
Press the STRINGS TONE SELECT button, and then use the DEC/INC buttons to
select the desired string tone.
Use the sliders located beneath UPPER 1 and UPPER 2 in the ZONE SWITCH/
5
CONTROL area to control the volume for the two layered tones.
©2008 Roland Corporation U.S.
RD-700GX
www.RolandUS.com
Digit al Piano
Splitting the Keyboard
You can split the RD-700GX keyboard so there's one tone beneath your left hand and
another tone beneath your right. These tones are called "lower" and "upper" tones,
respectively. Use the following procedure to split the keyboard:
1
Select a tone as described earlier—this sound will play in the upper half of your
split keyboard.
Press SPLIT so that the LOWER TONE indicator in the ZONE SWITCH/CONTROL area
2
is lit.
3
Use the CURSOR
 and  buttons to highlight "LW1" in the display.
4
Press the desired TONE SELECT button to choose the lower sound's tone category.
5
Use the DEC/INC buttons to select the lower sound's tone.
6
Use the sliders located beneath UPPER 1 and LOWER 1 in the ZONE SWITCH/
CONTROL area to control the volume for the two split tones.
Press SPLIT to exit Split mode.
7
Note:
To change the keyboard's split point, press and hold SPLIT for several seconds to
display the Split Point menu. While continuing to hold SPLIT, press the key where you want
the new split point to be.
Transposing the Keyboard
Use the following procedure to transpose the keyboard:
1
Press and hold the TRANSPOSE button to display the current transpose value.
While holding TRANSPOSE:
2
use the DEC/INC buttons to set the desired transpose value, or
press a key on the keyboard to set the desired transpose value.
Release the TRANSPOSE button—transposition is now active.
3
4
To turn off transposition, press TRANSPOSE so it's not lit.
Note:
The transpose value you selected will remain in temporary memory until it's changed,
or until you power off.
TBS263
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the RD-700GX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roland RD-700GX

  • Page 1 Press and hold the TRANSPOSE button to display the current transpose value. Layering Tones While holding TRANSPOSE: The RD-700GX can layer up to four tones. Use the following procedure to layer a piano • use the DEC/INC buttons to set the desired transpose value, or tone and a string tone: •...
  • Page 2 Registering and Recalling Favorite Setups The RD-700GX has 200 internal rhythm patterns. To play a rhythm pattern, use the For setups you frequently use, the RD-700GX has 40 Favorite locations you can get to following procedure: quickly using the Tone Select buttons. These locations are stored in four sets, or “banks, ”...