Roland RD-700GX Owner's Manual page 179

Parameter Value
Feedback -98– +98%
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance
D0:100W
Level 0–127
100: *STEP FLNGR (STEP FLANGER)
The Step Flanger effect is a flanger in which the flanger pitch
changes in steps.
MFX Control Step Rate, Feedback, Balance
Parameter Value
Pre Delay 0.0–100.0 ms
Rate 0.05–10.00 Hz
Depth 0–127
Feedback -98– +98%
0.10–20.00
Step Rate
Hz, note (*2)
Phase 0–180 degree
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance
D0:100W
Level 0–127
101: *STEREO DLY (STEREO DELAY)
MFX Control Balance
Description
Adjust the proportion (%) of the
processed sound that is returned (fed
back) into the input. Positive (+)
settings will return the sound in phase,
and negative (-) settings will return the
sound in reverse phase.
The effect becomes more prominent as
the value is increased.
Adjust the gain of the low frequency
range.
Positive (+) settings will emphasize
(boost) the low frequency range.
Adjust the gain of the high frequency
range.
Positive (+) settings will emphasize
(boost) the high frequency range.
Adjust the volume balance between
the direct sound and the flanger
sound. With a setting of D100:0W
only the direct sound will be output,
and with a setting of D0:100W only
the flanger sound will be output.
Adjust the output level.
Assignable Parameters
Description
Adjust the time delay from when the
direct sound begins until the flanger
sound is heard.
Adjust the rate of modulation.
Adjust the depth of modulation.
Adjust the proportion (%) of the
flanger sound that is returned (fed
back) into the input. Negative (-)
settings will invert the phase.
The effect becomes more prominent as
the value is increased.
Adjust the rate (period) of pitch
change.
Step Rate parameter can be set as a
note-value of a tempo. In this case,
specify the value of the desired note.
Adjust the spatial spread of the sound.
Adjust the gain of the low frequency
range.
Positive (+) settings will emphasize
(boost) the low frequency range.
Adjust the gain of the high frequency
range.
Positive (+) settings will emphasize
(boost) the high frequency range.
Adjust the volume balance between
the direct sound and the flanger
sound. With a setting of D100:0W
only the direct sound will be output,
and with a setting of D0:100W only
the chorus sound will be output.
Adjust the output level.
Assignable Parameters
Parameter Value
NORMAL,
Feedback mode
CROSS
Delay Left 0.1–500.0 ms
Delay Right 0.1–500.0 ms
NORMAL,
Phase Left
INVERT
NORMAL,
Phase Right
INVERT
Feedback -98– +98%
200–8000 Hz,
HF Damp
BYPASS
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance
D0:100W
Level 0–127
102: *MOD DELAY
(MODULATION DELAY)
This effect adds modulation to the delayed sound, producing
an effect similar to a flanger.
MFX Control Rate, Balance
Parameter Value
NORMAL,
Feedback mode
CROSS
Delay Left 0.1–500.0 ms
Delay Right 0.1–500.0 ms
Feedback -98– +98%
Effect/Parameter List
Description
Select the way in which delay sound is
fed back into the effect.
NORMAL: The left delay sound will be
fed back into the left delay, and the
right delay sound into the right delay.
CROSS: The left delay sound will be
fed back into the right delay, and the
right delay sound into the left delay.
Adjust the time from the direct sound
until when the left delay sound is
heard.
Adjust the time from the direct sound
until when the right delay sound is
heard.
Select the phase of the left delay
sound.
NORMAL: Phase is not changed.
INVERT: Phase is inverted.
Select the phase of the right delay
sound.
NORMAL: Phase is not changed.
INVERT: Phase is inverted.
Adjust the proportion (%) of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjust the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies of the feedback, set this
parameter to BYPASS.
Adjust the gain of the low frequency
range.
Positive (+) settings will emphasize
(boost) the low frequency range.
Adjust the gain of the high frequency
range.
Positive (+) settings will emphasize
(boost) the high frequency range.
Adjust the volume balance between
the direct sound and the delay sound.
With a setting of D100:0W only the
direct sound will be output, and with a
setting of D0:100W only the delay
sound will be output.
Adjust the output level.
Assignable Parameters
Description
Select the way in which delay sound is
fed back into the effect.
NORMAL: The left delay sound will be
fed back into the left delay, and the
right delay sound into the right delay.
CROSS: The left delay sound will be
fed back into the right delay, and the
right delay sound into the left delay.
Adjust the time from the direct sound
until when the left delay sound is
heard.
Adjust the time from the direct sound
until when the right delay sound is
heard.
Adjust the proportion (%) of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
179