Selecting The Type Of Amp (Amp Type) - Roland RD-700GX Owner's Manual

Roland rd-700gx: user guide
Hide thumbs Also See for RD-700GX:
Table of Contents

Advertisement

Making Detailed Settings for the ONE TOUCH Tones

Selecting the Type of Amp (AMP Type)

This switches the amp of the E. Piano. By changing the
combination of E. piano type and amp type, you can create a
variety of sounds ranging from standard E. piano sounds to
new sounds that have not been heard before.
THRU
No amp will be used.
OLD CASE
This combines TINE EP with a variation of it, reproducing a
typical E. piano sound of the early '70s.
Parameter
Value
Treble
-50–+50
Bass
-50–+50
Tremolo Sw
OFF/ON
Tremolo Rate
Hz/
Mode
Tremolo Rate
0.05–10.00Hz
(Hz)
Tremolo Rate
(*1)
(
)
Tremolo Depth
0–127
Tremolo Duty
-10–+10
LINE, OLD,
Speaker Sim
NEW, WURLY,
TWIN
Level
0–127
NEW CASE
This combines TINE EP with a variation of it, reproducing a
typical E. piano sound of the late '70s through '80s.
Parameter
Value
Treble
-50–+50
Bass
-50–+50
Tremolo Sw
OFF/ON
Tremolo Rate
Hz/
Mode
Tremolo Rate
0.05–10.00Hz
(Hz)
Tremolo Rate
(*1)
(
)
Tremolo Depth
0–127
86
Description
Amount of boost/cut for the high-
frequency range
Amount of boost/cut for the low-
frequency range
Turns tremolo on/off.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of the tremolo (Hz)
Frequency of the tremolo (note)
Depth of the tremolo
Specifies the duty cycle of the LFO
waveform used to apply tremolo.
Increasing this value will increase the
duty cycle of the LFO waveform for the
L-channel; the duty cycle for the R-
channel will decrease.
Type of the speaker
* When "LINE" is selected, no
speaker used.
Adjust the output level.
Description
Amount of boost/cut for the high-
frequency range
Amount of boost/cut for the low-
frequency range
Turns tremolo on/off.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of the tremolo (Hz)
Frequency of the tremolo (note)
Depth of the effect
Parameter
Value
Tremolo Duty
-10–+10
LINE, OLD,
Speaker Sim
NEW, WURLY,
TWIN
Level
0–127
DYNO
This amp type is a modification of OLD CASE or NEW CASE,
and is marked by a bright sound and distinctive distortion that
occurs when you play strongly. When used in conjunction with
TINE EP or a variation of it, this will reproduce the E. piano
sounds used in numerous recordings of the early '80s.
Parameter
Value
Filter Curve
0–127
Bass Boost
0–127
Overtone
0–127
Tremolo Sw
OFF/ON
Tremolo Rate
Hz/
Mode
Tremolo Rate
0.05–10.00Hz
(Hz)
Tremolo Rate
(*1)
(
)
Tremolo Depth
0–127
Tremolo Shape
0–127
Limiter
ON/OFF
LINE, OLD,
Speaker Sim
NEW, WURLY,
TWIN
Level
0–127
Description
Specifies the duty cycle of the LFO
waveform used to apply tremolo.
Increasing this value will increase the
duty cycle of the LFO waveform for the
L-channel; the duty cycle for the R-
channel will decrease.
Type of the speaker
* When "LINE" is selected, no
speaker used.
Adjust the output level.
Description
Amount of boost/cut for the middle-
frequency range
Amount of boost/cut for the low-
frequency range
Amount of boost/cut for the high-
frequency range
Turns tremolo on/off.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of the tremolo (Hz)
Frequency of the tremolo (note)
Depth of the tremolo
Adjusts the tremolo waveform.
Values near 0 will approach a triangle
wave, and values near 127 will
approach a pulse wave.
The effect will also change depending
on the Tremolo Depth setting.
Selects whether the limiter will be
applied (on) or not (off).
Type of the speaker
* When "LINE" is selected, no
speaker used.
Adjust the output level.

Advertisement

Table of Contents
loading

Table of Contents