Effect/Parameter List; Multi-Effects Parameter - Roland RD-700GX Owner's Manual

Roland rd-700gx: user guide
Hide thumbs Also See for RD-700GX:
Table of Contents

Advertisement

Effect/Parameter List

Multi-Effects Parameter

00: THRU
01: EQUALIZER
This is a four-band stereo equalizer (low, mid x 2, high).
MFX Control
Low Gain, High Gain, Level
Parameter
Value
Low Freq
200, 400 Hz
Low Gain
-15– +15 dB
Mid1 Freq
200–8000 Hz
Mid1 Gain
-15– +15 dB
0.5, 1.0, 2.0,
Mid1 Q
4.0, 8.0
Mid2 Freq
200–8000 Hz
Mid2 Gain
-15– +15 dB
0.5, 1.0, 2.0,
Mid2 Q
4.0, 8.0
2000, 4000,
High Freq
8000 Hz
High Gain
-15– +15 dB
Level
0–127
02: SPECTRUM
This is a stereo spectrum. Spectrum is a type of filter which
modifies the timbre by boosting or cutting the level at specific
frequencies.
MFX Control
Level
Parameter
Value
Band1 (250Hz)
Band2 (500Hz)
Band3
(1000Hz)
Band4
(1250Hz)
Band5
-15– +15 dB
(2000Hz)
Band6
(3150Hz)
Band7
(4000Hz)
Band8
(8000Hz)
0.5, 1.0, 2.0,
Q
4.0, 8.0
Level
0–127
154
Assignable Parameters
Description
Frequency of the low range
Gain of the low range
Frequency of the middle range 1
Gain of the middle range 1
Width of the middle range 1
Set a higher value for Q to narrow the
range to be affected.
Frequency of the middle range 2
Gain of the middle range 2
Width of the middle range 2
Set a higher value for Q to narrow the
range to be affected.
Frequency of the high range
Gain of the high range
Output Level
Assignable Parameters
Description
Gain of each frequency band
Simultaneously adjusts the width of the
adjusted ranges for all the frequency
bands.
Output Level
03: ISOLATOR
This is an equalizer which cuts the volume greatly, allowing
you to add a special effect to the sound by cutting the volume
in varying ranges.
MFX Control
Boost/Cut Low, Boost/Cut Mid, Boost/Cut High
Parameter
Value
Boost/Cut Low
Boost/Cut Mid
-60– +4 dB
Boost/Cut High
APhase Low Sw
OFF, ON
APhase Low Lev
0–127
APhase Mid Sw
OFF, ON
APhase Mid Lev
0–127
Low Boost Sw
OFF, ON
Low Boost Level
0–127
Level
0–127
04: LOW BOOST
Boosts the volume of the lower range, creating powerful lows.
MFX Control
Boost Gain, Boost Freq
Parameter
Value
Boost Freq
50–125 Hz
Boost Gain
0– +12 dB
WIDE, MID,
Boost Width
NARROW
Low Gain
-15– +15 dB
High Gain
-15– +15 dB
Level
0–127
05: SUPER FILTR (SUPER FILTER)
This is a filter with an extremely sharp slope. The cutoff
frequency can be varied cyclically.
MFX Control
Filter Cutoff, Filter Resonance, Rate, Depth
Assignable Parameters
Description
These boost and cut each of the High,
Middle, and Low frequency ranges.
At -60 dB, the sound becomes
inaudible. 0 dB is equivalent to the
input level of the sound.
Turns the Anti-Phase function on and
off for the Low frequency ranges.
When turned on, the counter-channel
of stereo sound is inverted and added
to the signal.
Adjusts the level settings for the Low
frequency ranges.
Adjusting this level for certain
frequencies allows you to lend
emphasis to specific parts. (This is
effective only for stereo source.)
Settings of the Anti-Phase function for
the Middle frequency ranges
The parameters are the same as for
the Low frequency ranges.
Turns Low Booster on/off.
This emphasizes the bottom to create a
heavy bass sound.
Increasing this value gives you a
heavier low end.
Depending on the Isolator and filter
settings this effect may be hard to
distinguish.
Output Level
Assignable Parameters
Description
Center frequency at which the lower
range will be boosted
Amount by which the lower range will
be boosted
Width of the lower range that will be
boosted
Gain of the low frequency range
Gain of the high frequency range
Output level
Assignable Parameters

Advertisement

Table of Contents
loading

Table of Contents