Adjusting The Volume Level For Individual Zones (Zone Switch/Zone Level Slider) - Roland RD-700GX Owner's Manual

Performance
Adjusting the Volume Level for Individual Zones
(ZONE SWITCH/ZONE LEVEL Slider)
With the RD-700GX, each of the parts that is performed using the internal sound
generator is referred to as an INTERNAL Zone.
For each zone (UPPER 1, UPPER 2, LOWER 1, LOWER 2), you can use the ZONE
SWITCH and ZONE LEVEL slider to turn the sound on/off and adjust its volume.
fig.Q1-21pe
ZONE SWITCH
This determines whether or not the sounds in the particular zone are played.
When a zone's ZONE SWITCH indicator is lit (on), the zone sounds when the keyboard
is played. The name of the zone will be shown in uppercase characters in the screen.
When a zone's ZONE SWITCH indicator is not lighted (off), the zone does not sound
even when the keyboard is played. The name of the zone will not be shown in the screen
(only UPPER 1 will be shown in lowercase characters).
ZONE SWITCH will turn on or off each time you press it.
ZONE LEVEL Slider
Adjusts the volume of an individual zone.
When a zone's ZONE SWITCH indicator is not lighted, no sound is produced for the
zone even when the slider is moved.
NOTE
Zones to which tones from external sound modules are assigned are called EXTERNAL
Zones. With the RD-700GX, you can control both the EXTERNAL and INTERNAL Zones
in the same manner. For more on the control of EXTERNAL Zone, refer to "Adjusting the
Volume of Each Zone (EXTERNAL Zone)" (p. 96).
46
ZONE LEVEL Sliders
ZONE SWITCH
Use the VOLUME slider when adjusting the overall volume level (p. 26).
If the "CONTROL" indicator is lit, you can't use the ZONE LEVEL sliders to adjust the
volume (p. 116).