Adjusting The Hum Noise (Hum Noise); Changing The Tuning Type (Tuning Type); Adjusting The Volume (Level); Selecting An Effect (Effect Type) - Roland RD-700GX Owner's Manual

Making Detailed Settings for the ONE TOUCH Tones

Adjusting the Hum Noise (HUM Noise)

This adjusts the amount of hum and other noise that leaks into
the pickups.
Electric pianos were susceptible to various types of noise, and
this noise would sometimes be output along with the sounds of
the performance. Depending on the effect settings, such noises
can produce an authentic, lively atmosphere.
Parameter Value
-10–0–
HUM Noise
+10
Depending on the selected Tone Type, this may
NOTE
have no effect.
Changing the Tuning Type
(Tuning Type)
By changing the tuning type you can change the way in which
chords will resonate.
Parameter
Tuning Type TYPE 1, TYPE 2
Depending on the selected Tone Type, this may
NOTE
have no effect.

Adjusting the Volume (Level)

This adjusts the volume of the E. Piano tone.
Parameter
Level 0–127
84
Description
Adjusting this value from 0
toward the negative side will
produce a clearer sound,
while adjusting it toward the
positive side will produce a
dirty sound.
At a setting of -10 there will
be no hum at all.
Value
Value

Selecting an Effect (Effect Type)

You can apply effects that are tuned specifically for the E. piano.
The available parameters will depend on the effect you select.
THRU
No effect will be applied.
CHORUS
Parameter Value
Pre Delay 0.0–100.0 ms
Rate Mode Hz, note
Rate (Hz) 0.05–10.00 Hz
Rate ( ) note (*1)
Depth 0–127
Phase 0–180 deg
D100:0W–
Balance
D0:100W
Level 0–127
PHASER
Parameter Value
Rate Mode Hz, note
Rate (Hz) 0.05–10.00 Hz
Rate ( ) note (*1)
Depth 0–127
Resonance 0–127
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
FLANGER
Parameter Value
Pre Delay 0.0–100.0 ms
Rate Mode Hz, note
Rate (Hz) 0.05–10.00 Hz
Rate ( ) note (*1)
Depth 0–127
Phase 0–180 deg
Feedback -98– +98%
Description
Adjusts the delay time from the direct
sound until the chorus sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Spatial spread of the sound
Volume balance between the direct
sound (D) and the chorus sound (W)
Output Level
Description
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Amount of feedback
Boot or cut in the low end
Boot or cut in the high end
Output Level
Description
Adjusts the delay time from the direct
sound until the flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Spatial spread of the sound
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.