Printer Does Not Print - Ricoh Aficio SP C811DN Hardware Manual

Printer Does Not Print

Is the power on?
Confirm that the cable is securely plugged into both the power outlet and the printer.
Turn on the power.
Does the Online indicator stay on?
If not, press the [Online] key to light it.
Does the Alert indicator stay red?
If so, check the error message on the display and take the required action.
See p.171 "Error and Status Messages Appears on the Control Panel".
Is paper loaded?
Load paper into the paper tray or onto the bypass tray.
See p.97 "Loading Paper".
Can you print a configuration page?
If you cannot print a configuration page, it probably indicates a printer malfunction. Contact your sales or
service representative.
See "Test Printing", Quick Installation Guide.
Is the interface cable connected securely to the printer and the computer?
Connect the interface cable securely. If it has a fastener, fasten it securely as well.
Are you using the correct interface cable?
The type of interface cable you should use depends on the computer you use. Be sure to use the correct
one.
If the cable is damaged or worn, replace it with a new one.
See p.229 "Specifications".
Is the Data In indicator blinking or lit after starting the print job?
If not blinking or lit, the data is not being sent to the printer.
If the printer is connected to the computer using the interface cable
Check the port connection setting is correct. For details about checking the port connection, see
p.177 "Checking the Port Connection".
Network Connection
Contact your network administrator.
Printer Does Not Print
9
175