Ricoh Aficio SP C811DN Hardware Manual page 103

6. Press the [Menu] key.
7. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [Paper Size: Tray 2], and then press the [OK] key.
9. Select [Auto Detect] using the scroll keys, and then press the [OK] key.
About two seconds later, the display returns to the Paper Input screen.
10. Press the [Online] key.
The display returns to the initial screen.
Loading custom size paper
This section describes how to load custom size paper into trays 2 to 5.
• When printing on custom size paper, specify the paper size using the control panel or printer driver.
• The custom size paper selected using the printer driver overrides that selected using the control panel.
Do not configure settings using the control panel if you have already configured settings using the
printer driver. However, when printing with a printer driver other than the RPCS printer driver, you
must configure the settings using the control panel.
• The following is the range of paper sizes that can be loaded in each type of tray:
• Paper tray: 182 to 297 mm (7.17 to 11.69 inches) in width and 148 to 432 mm (5.83 to 17
inches) in length.
• The printer cannot print to custom paper from applications that do not support custom size paper.
ATU050S
Loading Paper
5
101