Plain Paper - Ricoh Aficio SP C811DN Hardware Manual

Plain paper

Paper thickness
Printer setup
Printer driver setup
Supported paper feeding tray
Paper capacity
Duplex printing
Additional cautions
2
60 to 105g/m (16 to 28lb.)
• [Plain Paper]: 60 to 81g/m
• [Middle Thick]: 82 to 105g/m
• [Plain Paper]: Select [Paper Input]
Type: XXX] (XXX: Tray 1 to 5, Bypass Tray)
[Plain Paper].
• [Middle Thick]: Select [Paper Input]
Type: XXX] (XXX: Tray 1 to 5, Bypass Tray)
[Middle Thick].
• [Plain Paper]: Select [Plain] in [Paper Type].
• [Middle Thick]: Select [Middle Thick] in [Pa-
per Type].
Any input tray can be used.
• Tray 1 or tray 2: 550
• Tray 3: 550 (500/1000-sheet paper feed
unit) or 2000 (2000-sheet paper feed unit)
• Tray 4 or tray 5: 550
• Bypass tray: 100
• Make sure paper is not stacked higher than
the upper limit mark ( ) inside the tray. When
using the bypass tray, make sure paper is not
stacked higher than the paper guides inside
it.
Supported
When printing on the reverse side of plain paper
that is already printed on, select [Paper Type:]
[XXX] (XXX: Tray 1 to 5, Bypass Tray)
[Plain:Dup.Back] using control panel or printer driv-
er.
Paper Recommendations
2
(16 to 28lb.)
2
(22 to 28lb.)
[Paper
[Paper
87
5