Ricoh Aficio SP C811DN Hardware Manual page 26

2. Installing Options
When attached to the printer itself: "Tray 3", "Tray 4"
When attached to the 500-sheet paper feed unit: "Tray 4", "Tray 5"
See p.30 "Attaching the Paper Feed Unit".
3. 2000-sheet paper feed unit
Attach to the underside of the printer. Up to 2000 sheets of paper can be loaded, when using
2
plain paper. Including the standard paper trays (550 sheets 2 trays) and bypass tray (100
sheets), a maximum of 3,200 sheets of paper can be loaded at one time. The 2000-sheet paper
feed unit will be identified as "Tray 3".
See p.30 "Attaching the Paper Feed Unit".
4. Bridge unit
Remove the output tray and attach the bridge unit. The bridge unit sorts output going to the finisher
and output tray.
To attach this option, contact your sales or service representative.
5. Booklet finisher
Attach the bridge unit first, then attach this option on the left side of the printer. The finisher provides
features such as shift collate, stapling, binding and punching. In addition, it also supports print
job sorting features, such as shifting the output tray for each job.
• *1: Finisher upper tray
• *2: Finisher shift tray
• *3: Finisher booklet tray
To attach this option, contact your sales or service representative.
6. 2 Tray finisher
Attach the bridge unit first, then attach this option on the left side of the printer. The finisher provides
features such as shift collate, stapling and punching. In addition, it also supports print job sorting
features, such as shifting the output tray for each job.
• *4: Finisher upper tray
• *5: Finisher shift tray
To attach this option, contact your sales or service representative.
Paper feed unit and finisher combinations
A finisher can be attached only when the 1000 or 2000-sheet paper feed unit is used without
combination with the 500-sheet paper feed unit.
24