When The 2 Tray Finisher Is Installed - Ricoh Aficio SP C811DN Hardware Manual

4. Close the front cover of the finisher.
• If you do not re-install the punch waste box in step 3, the message remains displayed.
• If the message remains displayed, re-install the punch waste box.
• The message might appear even when the punch waste box is not full. In this case, there may be some
punch waste on the surface shown by the arrow. Remove the punch waste.

When the 2 Tray Finisher is Installed

1. Open the front cover of the finisher.
ASZ303S
ASZ272S
Removing Punch Waste
9
195