Ricoh Aficio SP C811DN Hardware Manual page 59

4. Insert the expansion card into the slot until it clicks.
5. Reattach the slot cover ( ), and fasten the screws to secure it ( ).
• Do not touch the card while the printer is in use. It may come loose, even if pushed only slightly. The
slot cover must be reattached.
• Confirm that the card was correctly installed by printing the configuration page.
• If the camera direct print card is installed properly, "PictBridge" will appear for "Connection Equip-
ment" in "System Reference".
• If the card is not installed properly, repeat the procedure from the beginning. If it cannot be installed
correctly even after reattempting installation, contact your sales or service representative.
• For information on printing the configuration page, see "Test Printing", Quick Installation Guide.
• "Test Printing", Quick Installation Guide
Installing a Camera Direct Print Card or Security Card
ATU030S
ATU031S
2
57