Troubleshooting; Error And Status Messages Appears On The Control Panel - Ricoh Aficio SP C811DN Hardware Manual

9. Troubleshooting

Error and Status Messages Appears on the Con-
trol Panel
This section explains what the messages that appear on the control panel mean and what to do when a
particular message appears.
Status Messages (in alphabetical order)
Calibrating...
The printer is calibrating the color. Wait a while.
Energy Saver
The printer is in Energy Saver mode. Press any keys to recover to the normal mode.
Hex Dump Mode
In Hex Dump mode, the printer receives data in hexadecimal format. Turn off the printer after printing, and
then turn back on.
Job Suspended
All jobs are suspended. Turn off the printer, and turn it on again to recover.
Loading toner
The printer is loading toner. Wait a while.
Offline
The printer is offline. To start printing, switch the printer online by pressing the [Online] Key.
Option RAM Error
The printer has detected an optional SDRAM module error. Replace the optional SDRAM module. See p.
35 "Attaching the SDRAM Module".
Please wait.
This message may appear for a few seconds. It means the printer is initializing, replenishing toner, or
executing maintenance operations. Wait a while.
Printing...
The printer is printing. Wait a while.
Ready
This is the default ready message. The printer is ready for use. No action is required.
9
171