Infrico Lab Care Plus ULF70086 Service Manual page 36

R02 1
R03 60
R04 200
R05 0
R06 0
R07 100
R08 -40
R09 -86
R10 20
PARAM. DEFECT MIN.
F01 0
F03 5
F05 0
F07 4
F09 100
F10 0
PARAM. DEFECT MIN.
G01 300
PARAM. DEFECT MIN.
ES1 24
ES2 24
- Compressing assets if the Tº camera ≥ Setpoint + R01
- Compressing I deactivate if the Tº camera ≤ Setpoint
Minimum time interval between two successive ignitions of
0 30 min
the compressor
0 300 s Compressor activation delay due to regulator activation
0 300 s Minimum time between compressor start-up and shutdown
Compressor ON time with compressor use alarm or chamber
0 300 min
alarm
Compressor OF time with compressor use alarm or chamber
0 300 min
alarm
0 100 % Maximum daily limit of compressor use
-50 50 ºC/ºF Maximum Allowable SetPoint Value
-50 50 ºC/ºF Minimum Allowable SetPoint Value
0 100 s Second compressor activation delay
MAX. M.U.
Enables evaporator fans
0 = Disabled
0 1 ---
1= Enabled
Referring also to the parameter C09
Setpoint ventilators evaporating during on-speed operation
5 50 ºC/ºF - activated ventilators if evaporating Tº≤ F03
- deactivated ventilators if evaporating T°≥ F03 + 5°C
Evaporator fans during defrost
0 1 --- 0 = Disabled
1 = Enabled
Temperature of activation of the ventilators of the evaporator
-40 50 ºC/ºF
after defrost or the ignition
0 300 min Fan OFF time with compressor shut down
0 300 min Fan ON time with compressor shut down
MAX. M.U.
Buzzer reactivation after silencing
0 900 s
0 = Disabled
MAX. M.U.
Energy saving start time
0 24 h
24h = Excluded
Energy saving end time
0 24 h
24h = Excluded
Service Manual and Warranty
ALARMS
ALARMS
ALARMS
35