Charts; Operating Time Counter - Infrico Lab Care Plus ULF70086 Service Manual

7.8

Charts

Press the
latter id enabled by the associated parameter).
The chart can be edited using the following keys:
- Y+ and Y: To change the Y axis scale (Y zoom)
- X+ and X: To change the scale along the X-axis
- IN and OUT: To change the X-axis scale (X zoom)
On the X-axis, time is shown in minutes up to 600 minutes. Beyond this limit, time is expressed in hours.
The sampling time is set with parameter PR1
7.9

Operating Time Counter

Press the
Key to display the temperature chart for the chamber and product probe (the
Key to display the equipment's operating time.
20
Service Manual and Warranty