Advertisement
Control Kit*
SELECTING THE PROPER CONTROL KIT
MODEL
OIL-FIRED SYSTEMS. (MAY REQUIRE OPTIONAL DELAY
CK-63
OIL VALVE FOR SIMULTANEOUS BURNER OPERATION.)
30/750 MILLIVOLT GAS-FIRED WATER HEATERS AND GAS-FIRED POOL OR
CK-20FV
SPA HEATERS WITH A MANUAL OR INTERNALLY MOUNTED THERMOSTAT.
CK-41F
FURNACES, BOILERS, UNIT HEATERS, AND WATER HEATERS OPERATING WITH
CK-41P**
A 24 VAC GAS VALVE WITHOUT FACTORY-MOUNTED SPILLAGE SWITCHES.
CK-43
DRAFT INDUCED 24 VAC GAS VALVE SYSTEMS. INCLUDES
CK-43F
A 4" MG-1 DRAFT CONTROL AND POST PURGE.
GAS-FIRED DRAFT INDUCED 24 VAC GAS VALVE SYSTEMS AND A 30 MILLIVOLT
CK-91FV
OPERATED WATER HEATER. INCLUDES A 4" MG-1 DRAFT CONTROL AND
POST PURGE.
CK-92FV
GAS-FIRED FURNACE OR BOILER AND A 30 MILLIVOLT
CK-92FVP**
OPERATED WATER HEATER. INCLUDES POST PURGE.
* CONTROL KITS ARE ETL APPROVED ACCESSORIES WHEN USED IN CONJUNCTION WITH THE SWG POWER VENTER.
** PLUGS INTO 24V ELECTRIC DAMPER.
*** A SECONDARY SAFETY SWITCH SHOULD BE USED WITH A CK-81.
F = FIXED POST PURGE. FV= RIGHT HAND THREADED TCA SAFETY SWITCH.
CONTROL KIT INSTALLATION
Technical Service:
800.742.8368 •
REQUIRED TO OPERATE SWG/CV POWER VENTERS
Control Kits (CK) control the operation of SWG/CV
Power Venters. See the chart below to select the proper
kit for your application. Control Kits can also control the
operation of Field Draft Inducers.
APPLICATIONS
CK-63 remote mounted. For use with 120V or 24V
oil or gas systems. Electronic post purge is included
(shown with cover off).
NOTE: CK kits can be mounted up to 100 feet from venter.
fieldcontrols.com
CONTROL KITS
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
7
Advertisement
Need help?
Do you have a question about the SWG-3 and is the answer not in the manual?
Questions and answers