Adding To Favorites In Wizard Mode - Kyocera ECOSYS M4125idn Operation Manual

Preparation before Use > Recalling Frequently Used Functions (Favorites)
Program name
Simple E-mail Send
(Address Book)
?
NOTE
Up to 20 functions combining copying and sending can be registered in the program.
You can select a favorite using either of two recall methods and register it.
• Wizard Mode (Selection Dialog): Registered settings are recalled in sequence, so settings are configured by
confirming or modifying them.
• Program Mode: Selecting a key that is a favorite immediately recalls the applicable setting.

Adding to Favorites in Wizard Mode

Here we will provide an example send operation.
1
Display a screen.
[Home] key > [Send] > [Favorites]
2
Adds Favorites.
1
[Menu] > [Add]
2
Select the job type.
3
Select [Wizard].
4
Select the function to recall > [Next >]
The selected item is shown by the wizard.
NOTE
The "Destination Recall Method" selection screen does not appear when the job type is Copy].
5
Enter a name for the favorite. > [Next >]
Character Entry Method (12-11)
Description
Use this when you want to send an image to
any destination E-mail address registered in
the Address Book. You can configure
destination, color, and other settings as
indicated by the instructions that appear.
• Transmission Function
• Wizard Mode
Destination: Address Book
Color: Full Color
Document Name Entry: Initial default
File Format: [PDF]
Continuous Scan: [Off]
Scan Resolution: [300 × 300 dpi]
E-mail Subject: Initial default
Mail Body: Initial default
3-44
Default Registration