Sleep And Auto Sleep - Kyocera KM-2560 Operation Manual

Sleep and Auto Sleep

OPERATION GUIDE
Sleep
To enter Sleep, press the Power key. Touch panel and all indicators on the
operation panel will go out to save a maximum amount of power except the
Main Power indicator. This status is referred to as Sleep.
If print data is received during Sleep, the print job is performed while the
touch panel remains unlit.
When using the optional fax, received fax data is printed out while the
operation panel also remains unlit.
To resume, press the Power key. The machine will be ready to operate
within 15 seconds.
Auto Sleep
Auto Sleep automatically switches the machine into Sleep if left idle for a
preset time in the Low Power Mode. The default preset time is 29 minutes.
Basic Operation
3
3-5