Adjusting Density; Density Adjustment - Kyocera KM-2560 Operation Manual

Adjusting Density

OPERATION GUIDE
Use this procedure to adjust the density when copying.

Density Adjustment

Option
Manual
Auto
The procedure for adjusting the density of copies is explained below.
1
Set the original on
the platen and press
[Image Quality] ->
[Density].
2
Adjust density manually pressing [-3] (Lighter) to [+3] (Darker). You can
change the density level [-3] (Lighter) to [+3] (Darker) in half-steps.
To change density
adjustment from
Manual to Auto,
press [Auto].
3
Press [OK].
4
Press the Start key. Copying begins.
Description
Adjust density using 7 or 13 levels.
Optimum density is selected according to the
density of the original.
Ready to copy.
Copy Image
Density Original
Image
Set Original.
Original : - - -
Zoom : 100%
- - -
Paper :
Preview
Quick Setup Org./Paper / Image
Finishing Quality
Status
Ready to copy.
Density
Auto
Press [OK] to display
Lighter
the image.
-3 -2 -1
-2.5 -1.5
Add Shortcut
Status
Basic Operation
Copies
1
EcoPrint
Layout /Edit Advanced
Setup
10/10/2007 10 :10
Copies
1
Normal Darker
0 +1 +2 +3
-0.5 +0.5 +1.5 +2.5
Cancel OK
10/10/2007 10 :10
3-11
3