Kyocera KM-2560 Operation Manual page 176

Maintenance
5-10
10
While gently holding the grid
cleaner in place with your left
hand, pull the main charger out
fully and then push it back to a
position where the roller A
does not quite reach the white
pad on the grid cleaner.
Repeat this procedure 2 or 3
times.
CAUTION:
When pushing the main charger back in, take care not to push
it all the way in. This could result in damage to copies.
11
With the main charger pulled
out about 5 cm, remove the
grid cleaner and then push the
main charger in fully.
12
Install a new waste toner box.
13
Remove cleaning brush (blue
colored).
A
OPERATION GUIDE