Accessing Command Center (Settings For Network And Transmission) - Kyocera KM-2560 Operation Manual

Preparation before Use

Accessing COMMAND CENTER (Settings for Network and Transmission)

2-12
COMMAND CENTER is a tool used for tasks such as verifying the
operating status of the machine and changing the settings for security,
network printing, E-mail transmission and advanced networking.
NOTE:
Here, information on the FAX settings has been omitted. For
more information on using the FAX, refer to the Fax Kit Operation Guide.
The procedure for accessing COMMAND CENTER is explained below.
1
Launch your Web browser.
2
In the Address or Location bar, enter the machine's IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and
COMMAND CENTER as well as their current status.
3
Select a category from the navigation bar on the left of the screen. The
values for each category must be set separately.
If restrictions have been set for COMMAND CENTER, enter the correct
user name and password to access pages other than the startup page.
OPERATION GUIDE