Power On/Off; Power Off - Kyocera KM-2560 Operation Manual

Basic Operation

Power On/Off

Power On

Power Off

3-2
Open the main power switch cover and turn the main power switch on.
Blinking/Lighting of each Key/Indicator
When turning on the main power switch, Key/Indicators such as Copy or
Send blink.
Blinking: This function is in preparation. When each key is ready, the
indicator lights out one by one.
Unlit: This function is ready.
Lit: This function is selected. Copy is selected as the default so that
the Copy key/indicator lights on first.
NOTE:
A key whose indicator is unlit can be used even if any other key
remains blinking.
If the optional Security Kit is installed, a message might display indicating
the security function is being activated and time may be taken to start up
when the power is turned on.
IMPORTANT: When turning off the main power switch, do not turn on the
main power switch again immediately. Wait more than 5 seconds, and then
turn on the main power switch.
Before turning off the main power switch, press the Power key on the
operation panel to off. Make sure that the Power key and the memory
indicator are off before turning off the main power switch.
CAUTION:
The hard disk may be operating when the Power key or
Memory indicator is lit or blinking. Turning off the main power switch while
the hard disk is operating may cause damage.
OPERATION GUIDE