Kyocera KM-2560 Operation Manual page 190

Troubleshooting
Error Message
Memory is full.
Paper jam.
Print overrun.
Removable memory
error.
Removable Memory is
removed.
Replace all originals
and press [Continue].
Replace the waste
toner box.
Reset all originals in
Document processor.
Scanner memory is
full.
6-8
Checkpoints
–
–
–
–
–
–
–
Are there any originals left in
the document processor?
–
Is the acceptable scanning
count exceeded?
Corrective Actions
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
paper.
Warning. Low printer memory. The
job is paused. Press [Continue] to
resume the job.
This job is canceled. Press [End].
Press [End].
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press [Continue] to resume printing.
Press [Cancel] to cancel the job.
The waste toner box is full. Replace
the waste toner box.
Remove originals from the document
processor.
Scanning cannot be performed due
to insufficient memory of scanner.
The job is canceled. Press [End].
Press [Continue] to print, send or
store the scanned pages. Press
[Cancel] to cancel printing, sending
or storing.
Reference
Page
—
6-12
—
—
—
2-49
5-7
—
—
—
OPERATION GUIDE