Interrupt Copy - Kyocera KM-2560 Operation Manual

Basic Operation

Interrupt Copy

3-22
This function allows you to pause the current jobs in progress when you
need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
The procedure differs depending on the Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On
The Copy function default screen appears on the touch panel during
printing.
1
Press [Interrupt].
Ready to interrupt
copy. is displayed.
The current print job
is temporarily
interrupted.
2
Place the originals onto the machine for interrupt copy, and configure the
copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press [Interrupt].
The machine resumes the paused print jobs.
NOTE:
If the machine is left for 60 seconds, interrupt copying is
automatically cancelled and printing resumes.
If you press [Interrupt] while specifying copy settings, the settings are
automatically reset and returns to the default setting.
Ready to copy.
Copy Image
Set Original.
Auto
Zoom
Original : - - -
Zoom : 100%
1-sided Text+Photo
- - -
Paper :
>>1-sided
Duplex
Preview
Quick Setup Org./Paper / Image
Finishing Quality
Status
Copies
Interrupt
Normal 0 Letter
Plain
Density Paper
Selection
Collate
Original Collate/
Image Offset
Layout /Edit Advanced
Setup
10/10/2007
OPERATION GUIDE
1
10 :10