Configuring A Network (Lan Cable Connection) - Kyocera KM-2560 Operation Manual

Preparation before Use

Configuring a Network (LAN Cable Connection)

Setting TCP/IP (When Using Fixed IP Address)
2-10
The machine comes with a standard network interface and supports each
of TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, allowing network
printing on various platforms such as Windows, Macintosh, UNIX and
NetWare.
Follow the steps below to set TCP/IP when a fixed IP address is used.
Make sure that an IP address is available by asking your network
administrator to obtain it in advance.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of TCP/IP.
3
Press [On] of TCP/
IP.
4
Press [Off] of DHCP.
5
Press [IP Address]
and enter the IP
address using the
numeric keys.
System - TCP/IP
Use TCP/IP.
DHCP
Off
On
On
Off
Status
System - TCP/IP
Use TCP/IP.
DHCP
Off
On
On
Off
Status
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Default
0.0.0.0
Gateway
Cancel OK
10/10/2007 10 :10
IP Address
192.168.1.150
Subnet Mask
0.0.0.0
Default
0.0.0.0
Gateway
Cancel OK
10/10/2007 10 :10
OPERATION GUIDE