Kyocera KM-2560 Operation Manual page 64

Preparation before Use
Login/Logout
2-28
4 Select [Local
Authentic.] or
[Network Authentic.]
to enable user login
administration.
Selecting [Off]
disables user login
administration.
If you select
[Network
Authentic.], enter
the host name (62
characters or less) and domain name (254 characters or less) for the
Authentication Server. Select [NTLM (WinNT)] or [Kerberos (Win2000/
2003)] as the authentication method.
NOTE:
If the login user name and password are rejected, check the
following settings.
• Network Authentication setting of the machine
• User properties of the Authentication Server
• Clock time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login as any
administrator registered in the local user list and correct the settings.
If the server type is [Kerberos (Win2000/2003)], only domain names
entered in uppercase will be recognized.
5
Press [OK].
If user login administration is enabled, it is necessary to enter the login user
name and password to use the machine.
Login
1
If the screen shown
appears during
operations, press
[Login User Name].
2 Enter the login user name and press [OK].
User Login/Job Accounting - User Login
User login administration.
Please select authentication method.
Off
Host Name
Local
Authentic.
Domain Name
Network
Authentic.
NTLM
(WinNT )
NTLM
(WinNT )
Status
Enter login user name and password .
Login
abcdef
User Name
Login
Password ********
Status
Kerberos
(Win2000 /2003)
Cancel OK
10/10/2007 10 :10
Login
10/10/2007 10 :10
OPERATION GUIDE