Collate/Offset Copying - Kyocera KM-2560 Operation Manual

Collate/Offset Copying

OPERATION GUIDE
6
Press [OK].
7
Place the original and press the Start key.
Once an original placed on the platen is scanned, replace it with the next
one. Then, press the Start key.
After scanning all originals, press [Scan finish] to start copying.
The machine can collate and offset at the same time as it copies.
You can use the Collate/Offset copy function for tasks such as those
shown below.
Collate
Scan multiple originals and
deliver complete sets of copies
as required according to page
number.
Offset
Use offset to produce copies
after rotating each set (or
page) by 90º.
NOTE:
To use the offset function, load the same sized paper with
different orientation in the paper source other than the selected paper
source.
The paper sizes supported in Offset are A4, B5, Letter and 16K.
The procedure for using collate/offset copying is explained below.
Basic Operation
3
2 2
1
1
3
2
1
Original Copy
3
2
1
3
2
1
Original Copy
3
3
2
1
3
3
2
1
3-19