Copying - Kyocera KM-2560 Operation Manual

Basic Operation

Copying

3-8
Follow the steps as below for basic copying.
1
Press the Copy key when the
Copy key/indicator is off.
NOTE:
If you place the original and press the Start key before the copier
has warmed up, only the scanning is performed in advance and the
copying job starts upon completion of the warm-up.
2
Place the originals on the
platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading Originals on page 2-47.
3
Check that [Auto] is selected of Paper Selection on the touch panel. Paper
that matches the size of the original will be selected automatically.
To change the paper
size, press, [Org./
Paper/Finishing],
[Paper Selection]
and select the
desired paper
source.
NOTE:
Select paper size manually, if necessary, instead of using
automatic paper selection.
Ready to copy.
Paper Selection
Press [OK] to display
the image.
:
Original - - -
:
Zoom 100%
:
Send - - -
Add Shortcut
Status
Copies
1
Auto
Letter Letter
Plain Plain
Ledger
MP Tray
Plain Setting
Letter
Plain
Letter
Plain
Cancel OK
10/10/2007 10 :10
OPERATION GUIDE