Send as E-mail
OPERATION GUIDE
Sends a scanned original image as an E-mail attachment.
NOTE:
•
You must have a network environment in which this machine can
connect to a mail server. It is recommended that the machine be used
in an environment in which it can connect to the mail server at any time
over a LAN.
•
Register the IP address and SMTP server host name in COMMAND
CENTER beforehand. For details, see Accessing COMMAND
CENTER (Settings for Network and Transmission) on page 2-12.
1
Place the originals on the
platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading Originals on page 2-47.
2
Press the Send key.
3
Press [E-mail Addr Entry] and then [E-mail Address].
NOTE:
Destination can be specified using the Address Book or the One-
touch Keys. Refer to Specifying Destination on page 3-42.
Basic Operation
3
3-27