Modifying Or Deleting Registered Information - Kyocera KM-1650 Operation Manual

Modifying or Deleting Registered Information

Note
If the abbreviated number that you want to modify is designated for Subaddress Communication,
you will not be able to change the designation of that number into one for Encrypted Transmission.
Likewise, if it is designated for Encrypted Transmission, you CANNOT change the designation into
one for Subaddress Communication.
1 Perform steps 1 – 3 of Registering New Abbreviated Numbers on page 2-24.
2 Enter the 3-digit number that corresponds to the
abbreviated number containing the information you
want to modify or delete. Then press the Enter key.
3 > Modifying registered information
(1) Press the
(2)Press the Enter key.
> Deleting abbreviated numbers
(1) Press the Stop/Clear key.
(2) Press the Enter key.
key or the
information you want to modify.
Follow the steps related to the desired information
in Registering New Abbreviated Numbers on
page 2-24, and change the information as desired.
If you want to cancel the deletion procedure, simply
press the Stop/Clear key again.
If you are finished modifying and/or deleting
abbreviated numbers, press the Reset key. The
operation panel will return to the initial mode
settings.
key to select the
Fax Operation (Basic Use)
Abbreviation:
End
:223355555
POR
:223355555
Enter Fax No.
Abbreviation:001
Delete
Press ENTER key
2-27