Setting The Current Date And Time ("Date & Time" Setting) - Kyocera KM-1650 Operation Manual

Setting the Current Date and Time ("Date & Time" setting)
Set the date and the time that will appear in the message display here. BE SURE that the date and
time that you set here are correct since they will serve as a basis for all communications that use the
timer.
Notes
•
•
1
Open the cover plate to the left and press the Register
key.
2 Press the
Parameter.
3
Press the Enter key.
4
Press the
[Date and Time].
5 Press the Enter key.
6 Use the keypad to enter the present date and time.
If you want to advance the cursor to the next space,
simply press the > key.
If you want to clear the currently displayed date and
time from the message display and enter it once again from the beginning, simply press the
Stop/Clear key.
7 Press the Enter key. The setting of the time and date is complete.
8
Press the
to the initial mode settings, press the Reset key.
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
Prior to operation, check the message1 display to make sure that the operation panel is in the
initial mode for fax operation. (See What is the "Initial Mode"? on page 1-13.)
If you want to cancel the procedure part way through, press the Reset key.
key or the key to select Program Fax
key or the key to select Date & Time
key or the key to select End and press the Enter key. To finish the setting and return
Program:
Program encryption box
Program Encryption ID
Program Fax Parameter
Program Fax Parameter:
Remote Switch
Remote Test ID
Date & Time
Date & Time:03-30-2004 13:29
Set Date & Time
:55
:0000
:13:12
1-11