Canceling A Communication; Canceling A Memory Transmission - Kyocera KM-1650 Operation Manual

Canceling a Communication

You can cancel a communication even if it is already in progress. The methods for canceling a
communication differ depending on whether that communication is a fax transmission or a fax
reception, and whether that transmission was initiated using the Memory Transmission mode or the
Direct Feed Transmission mode. The following contains explanations on the various methods used
for canceling communications.

Canceling a Memory Transmission

All transmissions accomplished in the Memory Transmission mode are handled as operations in the
background of the message display. In order to cancel a background operation, it is first necessary
to make that operation appear in the message display. Perform the following procedure to cancel
this type of transmission.
1
Open the cover plate to the left and press the
Alternate Display key. The background operation
currently in progress will appear in the message
display.
2
Continue holding the Alternate Display key down,
verify the document number of the transmission
currently in progress and then press the Stop/Clear
key. The transmission will be canceled.
If you attempt to cancel a transmission that is
scheduled to multiple destinations (such as a
Broadcast Transmission) and there were destinations
still remaining to be transmitted to, a message will
appear in the message display asking whether or not
you want to continue the transmissions to the
remaining destinations.
> If you select Yes, transmissions will be carried out to the remaining destinations.
> If you select No, or if you make no selection and the Auto Clear function engages and clears the
message display, transmission to the remaining destinations will also be canceled as well.
Fax Operation (Basic Use)
:5543
01Page
Communicating
Continue TX:
Yes
No
Doc # :004
2-11