Preparations; Designating The Type Of Phone Line Being Used ("Line Type" Setting) (Inch Version Only) - Kyocera KM-1650 Operation Manual

Kyocera km-1650: user guide
Hide thumbs Also See for KM-1650:
Table of Contents

Advertisement

Preparations

When using the fax functions of this machine for the first time after purchasing your Fax System,
perform the procedures as explained in "Designating the Type of Phone Line Being Used ("Line
Type" setting)" through "Setting the Current Date And Time ("Date & Time" setting)".
Note
If your service representative performs these settings during set-up of your Fax System, there is no
further need for you to perform these procedures.

Designating the Type of Phone Line Being Used ("Line Type" setting) (Inch version only)

Set the type of phone line here to correspond to the type of telephone service that you are using. BE
SURE the type of phone line you select here is correct because, if the setting is incorrect, dialing –
and therefore fax communication – will be impossible.
Notes
1
Press the System Menu key.
2
Press the
3
Press the Enter key.
4
Make sure that Line Type is selected in the message
display and press the Enter key.
The asterisk (*) in the message display indicates the
current setting.
5
Press the
phone line that you are using.
Select between Tone(DTMF) Line and
Pulse(10PPS) Line.
6
Press the Enter key. The Setting for the type of phone line is completed.
7
Press the
to the initial mode settings, press the Reset key.
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
Prior to operation, check the message display to make sure that the touch panel is in the initial
mode for fax operation. (See What is the "Initial Mode"? on page 1-13.)
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key to select Fax Default.
key or the
key to select the type of
key or the
key to select End and press the Enter key. To finish the setting and turn
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
End
Line Type
TTI
Line Type:
Tone(DTMF) Line
*
Pulse(10PPS) Line
:Tone Dial
:Outside P.
1-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-2050Km-2550Dc 2120Dc 2125

Table of Contents