Advertisement
Registering/deleting the ID card
information
The procedures below are to register or delete the card
information of a pre-registered user.
For new registration or change of user information on Local
User List, refer to the Operation Guide of the machine.
To register the ID card information
To login using the ID card, you need to register the ID card
information in the user information.
Follow the steps below.
1
Press the System Menu/Counter key.
NOTE:If Local Authentic. has been set in User Login, the
Use ID card to login. screen appears. Refer to Login or the
procedure of Key Login, and login using the ID card
registered with administrator privileges or using the login
user name.
To enter your login user name and login password, refer to
the machine's Operation Guide.
2
Press the ▲ or ▼ key to select [User/Job Account] and
then press the OK key.
NOTE:If User Login is disabled, the Use ID card to login.
screen appears. Refer to Login or the procedure of Key
Login, and login using the ID card registered with
administrator privileges or using the login user name.
To enter your login user name and login password, refer to
the machine's Operation Guide.
3
Press the ▲ or ▼ key to select [User Login Set.] and
then press the OK key.
4
Press the ▲ or ▼ key to select [Local User List.] and
then press the OK key.
5
Press the ▲ or ▼ key to select the user from User
Login List and then press the OK key.
6
Press the ▲ or ▼ key to select [ID Card Info.] and then
press [Change] (Right Select key).
7
Press the ▲ or ▼ key to select [Read] and then press
the OK key.
8
Hold the ID card to be registered over the card reader ,
and press [Read] (Right Select key). When
Registered. appears on the screen, and then returns to
the Detail menu.
9
In the Detail menu, press the OK key. The confirmation
screen appears.
10 Press [Yes] (Left Select key). The user information is
changed. When Registered. appears on the screen, the
ID card information is now registered.
To delete the ID card information
You can delete the ID card information registered in the
user information.
Follow the steps below.
1
Perform the step 1 to 6 of To register the ID card
information.
2
Press the ▲ or ▼ key to select [Delete].
3
In the confirmation screen, press [Yes] (Left Select
key). When Completed. appears on the screen, and
then returns to the Detail menu.
4
In the Detail menu, press the OK key. The confirmation
screen appears.
5
Press [Yes] (Left Select key). The user information is
changed. When Registered. appears on the screen, the
ID card information is now deleted.
Connecting the USB cable
Connect the USB cable of ID card reader to the USB
memory slot on the machine.
2
Advertisement
