Automatically Engaging The Energy Saving Mode (Auto Sleep Function) - Kyocera KM-1650 Operation Manual

Automatically Engaging the Energy Saving Mode (Auto sleep function)

Any time there is no operation of or activity with this
fax (no keys are pressed, no documents are set,
nothing is printed out, etc.) for a designated period
of time, the Auto sleep function will engage for
energy saving purposes and the fixing section
heater and fan inside the machine will shut down.
The amount of time most copy or fax machines
spend waiting for some operation to begin is
generally greater than the time actually spent on
copying or fax communication. Thus, the energy consumed during that time is a great percentage of
the overall energy used by the machine. Shutting down the fixing section heater and fan enables
energy and cost reductions by minimizing unnecessary energy consumption while the machine is in
this waiting state.
Notes
•
•
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
It is possible to change the amount of time that will elapse before the Auto sleep function is to
engage (factory default: 30 minutes). It is recommended that this be set to a longer period of
time if the machine is used frequently during the day, and to a shorter time if there are normally
long periods between use. (Refer to the Advanced Edition of the Operation Guide for your
machine.)
When the Auto sleep function engages, only the
Main power switch will remain lit and everything
else on the operation panel will go out. Fax
reception is possible even in this state, but in order
to send a fax you will need to press the Power
key.
1-15