Computer Setup (F10) Utility Menu - HP xw6400 Service And Technical Reference Manual

4. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, and press Enter.
5. To apply and save changes, select File>Save Changes then select Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
●
To reset to factory settings, select File>Default setup>Restore Factory Settings as
Default. Press
restores the original factory system defaults.
CAUTION
(F10) Utility changes because the Complementary Metal-Oxide Semiconductor (CMOS) could
become corrupted. After you exit the F10 Setup screen, it is safe to disconnect power from the
workstation.

Computer Setup (F10) Utility menu

NOTE
be different than shown.
Table 3-1 Computer Setup (F10) Utility menu descriptions
Heading Option
File System
Information
About
Set Time and
Date
Flash System
ROM
Replicated
Setup
Default Setup
Apply Defaults
and Exit
Ignore
Changes and
Exit
26 Chapter 3 System management
F10 to accept the changes. Select Apply Defaults and Exit. This option
Do not power off the workstation while the ROM is saving your Computer Setup
The following content is subject to change with new BIOS releases, so your menu might
Description
Lists product name, SKU number, processor type/speed/stepping, cache size (L1/L2), memory
type and size, integrated Media Access Control (MAC) for enabled or embedded NIC (if applicable),
system BIOS type, chassis serial number, and asset tracking number.
Displays copyright information.
Enables you to set system time and date.
Enables you to flash (update) system BIOS using any supported removable mass storage device
(CD-ROM, USB drive, floppy).
Save to Removable Media
Saves the current F10 Setup configuration to a text file called CPQSETUP.TXT, which can be used
for Replicated Setup functions.
Restore from Removable Media
Restores previous F10 Setup configuration from a text file called CPQSETUP.TXT, which can be
used for Replicated Setup functions.
Save Current Settings as Default
Stores the current F10 Setup configuration into the physical ROM as the default.
Restore Factory Settings as Default
Restores the original factory settings to the F10 Setup configuration information in the physical
ROM as the default.
Saves the selected default settings (previously-saved user settings or factory settings) into Non-
Volatile Random Access Memory (NVRAM) and exits.
Exits the Computer Setup (F10) Utility without applying or saving any changes.
ENWW