Computer Setup (F10) Utility Menu - HP Xw4550 - Workstation - 2 GB RAM Technical Reference Manual

4. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, and press Enter.
5. To apply and save changes, select File>Save Changes and then select F10=YES.
● If you have made changes that you do not want applied, select Ignore Changes and then
select F10=YES.
●
To reset to factory settings, select File>Default setup>Restore Factory Settings as
Default. Press
restores the original factory system defaults.
CAUTION: Do not power off the workstation while the ROM is saving your Computer Setup (F10)
Utility changes because the Complementary Metal-Oxide Semiconductor (CMOS) could become
corrupted. After you exit the F10 Setup screen, it is safe to disconnect power from the workstation.

Computer Setup (F10) Utility menu

NOTE: The following content is subject to change with new BIOS releases, so your menu might be
different than shown.
Table 3-1 Computer Setup (F10) Utility menu descriptions
Heading
File
ENWW
F10 to accept the changes. Select Apply Defaults and Exit. This option
Option
System Lists:
Information
● Product Name
● SKU Number
●
Processor Type/Speed/Stepping
● Cache Size (L1/L2)
● Installed Memory Size
●
Integrated MAC
●
System BIOS
● Chassis Serial Number
●
Asset Tracking Number
About Displays copyright information.
Set Time and Enables you to set system time and date.
Date
Flash System CD-ROM – Enables you to upgrade the BIOS from a ROM image on CD.
ROM
NOTE: Optical drives must be in Legacy or Native mode.
USB – Enables you to upgrade the BIOS from a ROM image on a USB drive or memory stick.
Replicated Save to Removable Media
Setup
Saves the system configuration, including CMOS, in the QSETUP.TXT file. This file can be saved
to a formatted, blank 1.44-MB diskette or to a USB-connected storage device.
Restore from Removable Media
Restores system configuration from a diskette.
Default Setup Save Current Settings as Default
Saves the current settings as default settings for the next operation.
Description
Computer Setup (F10) Utility 27