Figure 4-6
To replace the front bezel, align front bezel on the bottom and rotate in until it snaps into place.
Bezel blanks
To remove the bezel blanks:
1.
Disconnect power from the system
bezel
(Front Bezel on page
2.
Remove the bezel blanks by squeezing in 1 on the tabs and pushing the bezel blanks out 2.
Figure 4-7
Top cover
NOTE
ENWW
Opening the front bezel
64)
Removing the bezel blanks
It is unnecessary to remove the top cover for most removal or replacement procedures.
(Predisassembly procedures on page
Removal and replacement of components
57) and remove the front
65