Product Specifications; Power Supply - HP xw6400 Service And Technical Reference Manual

Product specifications

The following table lists the physical dimensions for the HP xw6400 Workstation.
Table 1-4 Physical characteristics
Weight (typical
configuration)
Tower dimensions
Rack-mount dimensions
(top cover and foot removed)

Power supply

This section describes power supply specifications for the HP xw6400 Workstation.
● +3.3V—PCI, MCH, ICH5, PXH, LAN, SATA, and SAS hard drives, and on-board logic
●
+5V—Storage (disk, optical, diskette), PCI, audio, USB, input to on-board regulator, and on-board
logic
● +12V-B-—PCI, fans, and input to on-board regulators that supply 1.2V
●
+12V-D—Storage (disk, optical, diskette), PCI Express x16 auxiliary connector
●
+12VCPU0—Input to on-board regulator that supplies power for CPU0 and input to on-board
regulators that supply 1.5 V and 1.8 V to memory slots
●
+12VCPU1—Input to on-board regulator that supplies power for CPU1
●
-12V—PCI
●
5VSB—Standby mode circuitry
Table 1-5 Power supply voltage
Voltage
3.3 V
5.1 V
12 VCPU0
12 VCPU1
12 V-A
12 V-D
V12N
5.08 VSB
6 Chapter 1 Product overview
16 kg (35 lb)
441 mm (17.4 in.) tall
165 mm (6.5 in.) wide
440 mm (17.3 in.) deep
165 mm (6.5 in.) tall, less than 4U
425 mm (16.75 in.) wide (fits in a standard 19-in. rack)
440 mm (17.3 in.) deep
Minimum
3.2 V
4.8 V
11.5 V
11.5 V
11.5 V
11.5 V
–10.9 V
4.8 V
Maximum
3.5 V
5.3 V
12.6 V
12.6 V
12.6 V
12.6 V
–13.2 V
5.3 V
ENWW